355 Holden Gold Pro Long Engine (535 HP)  - Street Solid Roller Cam

Dynoed with Turn Key Extras


TORQUE: 455 ftlbs @ 5100 RPM- Carburetted
HORSEPOWER:
535 @ 6750 RPM- Carburetted

CAMSHAFT: Custom Pavtek Street Solid Roller
CYLINDER HEADS:
5 Axis CNC Ported (Intake 100% Exhaust 100% Chambers -NO)
FUEL REQUIRED:
Premium Unleaded98
LONG MOTOR ASSEMBLED:
L3553STR

 

$ 19,600 Dynoed With Turn Key Extras
Price based on customer supplying:

Engine Block

Virgin VN Cylinder Heads

Oem Timing Cover & Bolts

Oem Cam Bolts & Retaining Plate

 

 


SHORT MOTOR KIT:
S3553

ASSEMBLED HEADS : H355H301S

WANT IT NOW AND ARE LOOKING FOR A SUPER DEAL ON OUR ENGINE PACKAGES ?
CLICK HERE TO GO TO OUR IN STOCK LONG ENGINES

 

 

APPLICATION

This combination is based on our very popular Gold Pro 355 Stroker combo (L3553 ) and uses a street solid roller camshaft eliminating the hassles of prematurely worn lobes that is so common with Holden V8 Engines. The Solid roller camshaft gives you extra reliability with more torque & power over the conventional solid cam used in our L3553 package.

The camshaft used in this package is also suitable for EFI.

 

PARTS INCLUDED:

Main stud girdle   10 Degree Machined Valve locks
Brass Welsh Plug kit   10 Degree Chrome Moly Retainers
HV Super oil pan to suit MSG   Isky 9005 Dual W/dampner springs
Modified oiling circuit   Power Bond Race Steel Balancer
New Oil Pump   Crane Teflon Valve Stem Seals
Arp Main Stud Kit   SS Inlet Valves - Ferrea
Stroker Crankshaft (New C.O.M.E)   SS Exhaust Valves -Ferrea
H-Beam Conrods   Yella Terra Shaft rockers
Street Solid ROLLER Camshaft   Comp Cams Roller Lifters(.842")
SRP Forged Pistons   9 Key Rollmaster Timing chain set
1/16 1/16 3/16 Moly Rings   .080" Chrome Moly Pushrods
Cam Bearings   Full Gasket set
Main Bearings- HP ACL Race   Big End bearings- HP ACL Race
HD oil pump gear to suit roller cam   Grooved lifter bores
Full Race port cylinder heads   Line honed main tunnels
Oil restrictors   Dynamically computer balanced
Block is grouted for added strength   Competition rear main seal
TorquePower Single Plane Intake    

 

Dyno Turn Key Extras Included:

Engine Run In On Dyno
Engine Tuned on Engine Dyno
Spark Plugs / Oil Filter / Runin Oil
750 Cfm 4150 Street Hp Carby
Ice Complete Ignition system - With 80 Curves & Rev Limiter
Arp Carby Studs
Aeroflow Billet Fuel Pump Block Off
Aeroflow Billet Dizzy Clamp
Pavtek Billet 2" Ported Carby Spacer
Arp Carby Studs
Pavtek "Since 1989" T-Shirt

 

Note: 1 3/4"  Extractors must be used. Which are available off the shelf

Image is shown with optional:
Billet Thermostat Housing

Billet Throttle Bracket
Billet Fuel Log


Suitable for EFI cars also

 LUD 15082016